2
Layout & Overview
Track I
Voice I Voice II
Track II
Dyad is based on two identical synthesizer voices, each controlled by separate
sequencer tracks. The sequencer is laid out vertically while the voice controls are
laid out horizontally underneath.
The sequencer has both a trigger (top) and modulation (bottom) track with
individual length and tempo division. The trigger track sends velocity and note-on
to the voice while the modulation affects the main ve voice parameters.
Each parameter has a separate modulation lane with a shared track length.
The sequencer controls above are all stored in the pattern, which means that they
cannot be automated or modulated but are recalled with pattern changes.
Trigger
Track Length
Modulation
Modulation
Target
Division
To Next Page
Loading...