Settings
11
When the second voice (II) is selected there is a fourth option "Hz", which lets you
Link the second voice frequency to the rst, this is useful for layering the voices
or creating intricate counter melodies. The modulation on the second voice will
be applied on top of the rst frequency.
The synthesizer settings change how the synth voices sound and respond to
modulation. Each voice is individually congured by pressing the top buttons.
Signal toggles between a clean and dirty signal path. While subtle, the dirty
setting introduces noise and distortion depending on the dynamics of the voice
and sounds more like you would expect analog gear to behave.
Phase toggles between resetting the oscillator phase per trigger (sync) or to
keep it free running. A synced phase results in a more consistent onset and is
suitable for percussive sounds.
Modulation changes how the sequencer modulation is received. When set to Free,
it always receives modulation as soon as the modulation track advances to the
next step. However, if set to Latched it receive and hold the modulation when the
voice is triggered.
To Next Page
Loading...