Basket height adjustment mechanism on the upper basket
of your machine is designed to let you adjust the height of
your upper basket upwards or downwards,without
removing it from your machine when it is full,and create
large spaces at the top or bottom area of your machine as
needed.Basket of your machine is set to lower position in
factory settings.
In order to raise your basket,hold it from both sides and
pull it upwards.In order to lower it,hold it from both sides
again,and leave it.
Upper Basket Height Adjustment
In loaded basket adjustment mechanism, make sure that both sides are in the same
position(up or down).
Loading the Lower Basket
We recommend that you place large items which are most difficult to clean in to the lower
basket: pots, pans, lids, serving dishes and bowls, as shown in the figure below.
It is preferab`le to place serving dishes and lids on the side of the baskets in order to avoid
blocking the rotation of the top spray arm.
Pots, serving bowls, etc. must always be placed top down.
Deep pots should be slanted to allow water to flow out.
The bottom basket features fold down tine rows so that larger or more pots and pans can
be loaded.
Lower Basket
Lower basket
Type
Item
Serving Oval
platter
G
H
I
Dinner plate
Bread plate
Fruit bowl
Serving bowl
F
D
F1
F9
D1
D2
I1
G5
H1
F8
F12
H12
15
To Next Page
Loading...
