4 Radar Configuration and Data Collection
The TrueView Graphical User Interface Guide document details how to configure the radar and
start collecting radar data.
As a quick start, to begin transmitting, simply click on the toggle button that is labeled
“Transmit” located at the top right corner of your screen.
NOTE: Please ensure you are transmitting in a safe direction. See the FAQ for more
details.
By toggling the Transmit
switch, the TrueView radar will begin transmitting and collecting data.
This data can be seen and analyzed on the View and Data displays. The View screen shows
radar detections, and the Data screen shows graphical representations of the data. Radar
transmit, receive, and processing settings can be modified from the Settings page
NOTE: The additional configurations and settings for the radar cannot be changed while
the TrueView radar is actively transmitting.
13
To Next Page
Loading...
Need help?
General