Need help?Do you have a question about the Fortin Nano-Start and is the answer not in the manual?
Explains functions of the FTX5 remote control.
Details functions for FTX25 series remotes.
Outlines features and operations of the FTX1 remote.
Lists essential safety warnings for remote start operation.
Step-by-step guide to remotely start the vehicle.
Instructions for pre-setting vehicle accessories for remote start.
Details methods for activating and disabling Ready Mode for manual transmissions.
Steps to safely drive the vehicle after remote start.
Instructions on how to stop an active remote start session.
Describes Idle Mode for automatic and manual transmissions.
Explains Turbo Mode for automatic transmissions.
Explains Turbo Mode for manual transmissions.
How to activate Valet Mode using the default switch method.
Steps to enable/disable Valet Mode with a coded sequence.
Steps to activate Valet Mode using the remote transmitter.
Steps to deactivate Valet Mode using the remote transmitter.
Explains the functions of the 5-button remote.
Describes LED and speaker feedback for remote actions.
Details LED and speaker signals for alarm status.
Procedure to check the vehicle's current status.
Table showing LED, speaker, and status for vehicle conditions.
How to activate the periodic remote start feature.
Various methods to deactivate the timer.
Functionality for Auxiliary Output 1 on the remote.
Functionality for Auxiliary Output 2 on the remote.
Steps to operate a second vehicle with one remote.
Programmable settings during installation.
Operation of remote door locking/unlocking features.
Explanation of Active and Passive arming modes.
Automatic door locking/unlocking based on ignition status.
How the system re-arms OEM anti-theft after shutdown.
Operation of the trunk or hatch release function.
Specifies runtimes for gas and diesel engines.
How to reset the runtime using the remote.
Feature to prevent accidental button presses.
Settings for horn/siren confirmation of alarm signals.
How the alarm signals and responds to events.
How the system indicates active zones when arming.
How the system handles zones triggering multiple false alarms.
Details the two-stage shock sensor functionality.
How to use the panic or locator feature.
How to disable specific sensitive sensors.
Factors affecting the remote transmitter's operating range.
Common reasons and checks for failed remote starts.
Interprets parking light flashes for starter issues.
Interprets parking light flashes for alarm issues.
To Next Page
General
