Fortinet 548B - Page 109

- 109 -
7.2.8.16 set mld fast-leave
The user can go to the CLI VLAN Configuration Mode to set MLD Snooping fast-leave admin mode on a
particular VLAN, use the set mld fast-leave <vlanid> vlan configuration command. Use the no set mld
fast-leave <vlanid> disable MLD Snooping fast-leave admin mode.
Syntax
set mld fast-leave <vlanid>
no set mld fast-leave <vlanid>
Default Setting
Disabled
Command Mode
VLAN Mode
7.2.8.17 set mld groupmembership-interval
The user can go to the CLI VLAN Configuration Mode to set the MLD Group Membership Interval time
on a particular VLAN, use the set mld groupmembership-interval <vlanid> <2-3600> vlan
configuration command. Use the no set mld groupmembership-interval <vlanid> return to default
value 260.
Syntax
set mld groupmembership-interval <vlanid> <2-3600>
no set mld groupmembership-interval <vlanid>
Default Setting
260
Command Mode
VLAN Mode
7.2.8.18 set mld maxresponse
The user can go to the CLI Interface VLAN Mode to set the MLD Maximum Response time on a
particular VLAN, use the set mld max-response-time <vlanid> <1-65> vlan configuration command.
Use the no set mld max-response-time <vlanid> return to default value 10.
Syntax
set mld max-response-time <vlanid> <1-65>
no set mld max-response-time <vlanid>