Fortinet 548B - Page 108

- 108 -
Syntax
Ipv6 mld snooping mrouter interface interface|<vlanId>
no ipv6 mld snooping mrouter interface|<vlanId>
Default Setting
None
Command Mode
Interface Config
7.2.8.14 ipv6 mld snooping static
The user can go to the Global Mode and add a port to ipv6 multicast group, use the ipv6 mld snooping
static Global command.
Syntax
ipv6 mld snooping static <macaddr> vlan <vlan-id> interface <slot/port>
no ipv6 mld snooping static <macaddr> vlan <vlan-id> interface <slot/port>
Default Setting
None
Command Mode
Global Config
7.2.8.15 set mld
The user can go to the CLI VLAN Mode to set MLD Snooping on a particular VLAN, use the set mld
<vlanid> vlan configuration command. Use the no set mld <vlanid> to disable MLD Snooping on a
particular VLAN.
Syntax
set mld <vlanid>
no set mld <vlanid>
Default Setting
Disabled
Command Mode
VLAN Mode