Fortinet 548B - Page 118

- 118 -
7.2.10.3 port-channel adminmode all
This command sets every configured port-channel with the same administrative mode setting.
Syntax
port-channel adminmode all
no port-channel adminmode all
no - This command disables a port-channel (LAG). The option all sets every configured port-channel
with the same administrative mode setting.
Default Setting
Enabled
Command Mode
Global Config
7.2.10.4 staticcapability
This command enables the static function to support on specific port-channel (static link aggregations -
LAGs) on the device. By default, the static capability for all of port-channels is disabled.
Syntax
staticcapability
no staticcapability
no - This command disables to support static function on specific port-channel on this device.
Default Setting
Disabled
Command Mode
Interface Config
7.2.10.5 port-channel linktrap
This command enables link trap notifications for the port-channel (LAG). The interface is a logical slot
and port for a configured port-channel. The option all sets every configured port-channel with the same
administrative mode setting.
Syntax