Fortinet 548B - Page 121

- 121 -
7.2.10.8 port-channel system priority
This command defines a system priority for the port-channel (LAG).
Syntax
port-channel system priority <priority-value>
<priority-value> - valid value 0-65535.
Default Setting
32768
Command Mode
Global Config
7.2.10.9 adminmode
This command enables a port-channel (LAG) members. The interface is a logical slot and port for a
configured port-channel.
Syntax
adminmode
no adminmode
no - This command disables a configured port-channel (LAG).
Default Setting
Enabled
Command Mode
Interface Config
7.2.10.10 lacp
This command enables Link Aggregation Control Protocol (LACP) on a port.
Syntax
lacp
no lacp