Fortinet 548B - Page 159

- 159 -
Syntax
password-threshold <0-120>
no password-threshold
<threshold> - max threshold (Range: 0 - 120).
no - This command sets the maximum value to the default.
Default Setting
3
Command Mode
Line Config
7.3.2.6 silent-time
This command uses to set the amount of time the management console is inaccessible after the number
of unsuccessful logon tries exceeds the threshold value.
Syntax
silent-time <0-65535>
<0-65535> - silent time (Range: 0 - 65535) in seconds.
no - This command sets the maximum value to the default.
Default Setting
0
Command Mode
Line Config
7.3.2.7 terminal length
This command uses to configure the columns per page for the management console.
Syntax
terminal-length <10-100>
<10-100> - Columns per page (Range: 10 - 100).
no - This command sets the value to the default.