Fortinet 548B - Page 312

- 312 -
7.14.2.2 vtp domain
This command uses to set VTP administrative domain name.
Syntax
vtp domain <string>
no vtp domain
<string> - Configures the string for domain name. (maximum length 32 bytes)
no - This command resets the domain name to NULL.
The system disables the VTP for its initialization.
The maximum length of administrative domain name is 32 bytes.
The system’s default administrative domain name is NULL.
Default Setting
None
Command Mode
Global Config
7.14.2.3 vtp mode
This command uses to set VTP device mode. There are theree modes you can configure, Client,
Server, and Transparent.
Syntax
vtp mode { client | server | transparent }
no vtp mode
<client> - This command set client mode for VTP.
<server> - This command set server mode for VTP.
<transparent> - This command set transparent mode for VTP.
no - This command resets the VTP mode to default value.
Default Setting
Server