Fortinet 548B - Page 313

- 313 -
Command Mode
Global Config
7.14.2.4 vtp version
Use the no vtp version to reset the VTP version number to default value..
Syntax
vtp version <1-2>
no vtp version
no - This command resets the VTP version to default value.
Default Setting
1
Command Mode
Global Config
7.14.2.5 vtp password
This command uses to configure the VTP administrative domain password.
Syntax
vtp password <password>
no vtp password
<password> - Configures VTP administrative domain password.(Max. length 64 bytes)
no - This command resets the VTP domain password to default value.
Default Setting
None
Command Mode
Global Config