Fortinet 548B - Page 320

- 320 -
Privileged Exec
7.17.1.2 clear traplog
This command clears the trap log.
Syntax
clear traplog
Default Setting
None
Command Mode
Privileged Exec
7.17.1.3 clear eventlog
This command is used to clear the event log, which contains error messages from the system.
Syntax
clear eventlog
Default Setting
None
Command Mode
Privileged Exec
7.17.1.4 clear logging buffered
This command is used to clear the message log maintained by the switch. The message log contains
system trace information.
Syntax
clear logging buffered