Fortinet 548B - Page 321

- 321 -
Default Setting
None
Command Mode
Privileged Exec
7.17.1.5 clear config
This command resets the configuration to the factory defaults without powering off the switch. The switch
is automatically reset when this command is processed. You are prompted to confirm that the reset
should proceed.
Syntax
clear config
Default Setting
None
Command Mode
Privileged Exec
7.17.1.6 clear pass
This command resets all user passwords to the factory defaults without powering off the switch. You are
prompted to confirm that the password reset should proceed.
Syntax
clear pass
Default Setting
None
Command Mode
Privileged Exec