8 9
Bracket Installation Antenna Installation
(FAP-233G only)
The FortiAP mounts on a ceiling using the provided T-rail mounting brackets
that come in two standard sizes: 1.43cm (9/16in) and 2.38cm (15/16in).
1. Select the bracket for the T-rail size: 1.43cm (9/16in) or 2.38cm (15/16in)
2. With the ports facing you, slide the bracket left to right
3. Hold the device against the ceiling T-rail and push until it snaps into place
1. Insert the antenna base firmly into the appropriate antenna mount
2. Securely hand tighten the antenna fastening collar
3. Repeat for the remaining antennas
fastening collar
Note: Antennas A2 and A3 are non-detachable. Antennas A1 and A4
are detachable.
To Next Page
Loading...
