Fortinet FortiGate FortiGate-1000 - Factory Default Transparent Mode Network Configuration

18 01-28004-0025-20040830 Fortinet Inc.
Factory default FortiGate configuration settings Getting started
Factory default Transparent mode network configuration
In Transparent mode, the FortiGate unit has the default network configuration listed in
Table 3 .
Port 2
IP: 0.0.0.0
Netmask: 0.0.0.0
Administrative Access: Ping
Port 3
IP: 0.0.0.0
Netmask: 0.0.0.0
Administrative Access: Ping
Port 4/HA
IP: 0.0.0.0
Netmask: 0.0.0.0
Administrative Access: Ping
Network Settings
Default Gateway (for default route) 192.168.100.1
Interface connected to external network
(for default route)
external
Default Route
A default route consists of a default gateway and the name of
the interface connected to the external network (usually the
Internet). The default gateway directs all non-local traffic to this
interface and to the external network.
Primary DNS Server 207.192.200.1
Secondary DNS Server 207.192.200.129
Table 2: Factory default NAT/Route mode network configuration (Continued)
Table 3: Factory default Transparent mode network configuration
Administrator
account
User name: admin
Password: (none)
Management IP
IP: 10.10.10.1
Netmask: 255.255.255.0
DNS
Primary DNS Server: 207.194.200.1
Secondary DNS Server: 207.194.200.129
Administrative access
Internal HTTPS, Ping
External Ping
Port 1 Ping
Port 2 Ping
Port 3 Ping
Port 4/HA Ping