Fortinet FortiSwitch-548B v. 5.2.0.2 - Page 213

- 213 -
Syntax
spanning-tree max-age <6-40>
no spanning-tree max-age
<6-40> - the Bridge Max Age value (Range: 6 – 40).
no - This command sets the Bridge Max Age parameter for the common and internal spanning tree
to the default value, that is, 20.
Default Setting
20
Command Mode
Global Config
7.4.2.8 spanning-tree max-hops
This command sets the MSTP Max Hops parameter to a new value for the common and internal
spanning tree. The max-hops value is in a range of 1 to 127.
Syntax
spanning-tree max-hops <1-127>
no spanning-tree max-hops
<1-127> - the Maximum hops value (Range: 1-127).
no - This command sets the Bridge Max Hops parameter for the common and internal spanning tree
to the default value.
Default Setting
20
Command Mode
Global Config
7.4.2.9 spanning-tree hold-count
This command sets the Bridge Tx Hold Count parameter to a new value for the common and internal
spanning tree. The Tx Hold Count value is in a range of 1 to 110.
Syntax
spanning-tree hold-count <1-10>
no spanning-tree hold-count