Fortinet FortiSwitch-28C User Manual

FortiSwitch Standalone Mode
Administration Guide

Fortinet FortiSwitch-28C Specifications

General

Brand	Fortinet
Model	FortiSwitch-28C
Category	Switch
Language	English

Summary

Change Log

Introduction

Supported Models

Lists all supported FortiSwitch models for FortiSwitchOS.

Before You Begin

Outlines assumed prior configurations and access requirements.

How this Guide is Organized

Explains the structure and content of the administration guide chapters.

System Settings

Configuring the Management Ports

Details configuring management ports via web-based manager and CLI.

Example Configurations

Provides CLI syntax examples for various management port configurations.

Ports

Configuring a Port Mirror

Instructions for setting up port mirroring using the web-based manager and CLI.

802.1x

Authenticating with a RADIUS server

Steps for configuring RADIUS server for 802.1x authentication.

Example Configuration

A practical example of RADIUS user group configuration for 802.1x.

LACP Mode

Configuring the Trunk/LAG Ports

Guidance on configuring Link Aggregation Control Protocol (LACP) trunks.

Example Configuration

CLI configurations for setting up trunk/LAG ports.

Viewing the Configured Trunk

Command to view the details of a configured trunk/LAG.

TACACS

Admin Account Configuration

Configure administrative access profiles and TACACS admin accounts.

User Account Management

Configure TACACS user accounts and groups for network access.

Power over Ethernet

Enabling PoE on a Port

Steps to enable Power over Ethernet (PoE) on a specific port.

Determining the PoE Power Capacity

Command to check the PoE power capacity of the switch.

Reset the PoE Power on a Port

Command to reset the PoE power supply for a port.