Fortinet FortiSwitch-108D-POE User Manual

FortiSwitch Standalone Mode
Administration Guide

Fortinet FortiSwitch-108D-POE Specifications

General

Brand	Fortinet
Model	FortiSwitch-108D-POE
Category	Switch
Language	English

Summary

Introduction

Supported Models

Lists all FortiSwitch models supported by FortiOS.

Before You Begin

Outlines prerequisites and initial configuration steps before starting.

How this Guide is Organized

Explains the structure and chapters covered in the administration guide.

System Settings

Configuring the Management Ports

Details methods for configuring management ports via web-based manager and CLI.

Configuring Static Routing for the Internal Management Port

Provides CLI commands for configuring static routing for the management port.

Ports

Configuring a Port Mirror

Explains how to configure port mirroring for network traffic monitoring.

802.1x

Authenticating with a RADIUS server

Details the process of setting up 802.1x authentication using a RADIUS server.

LACP Mode

Configuring the Trunk/LAG Ports

Guides on configuring Link Aggregation Control Protocol (LACP) trunk/LAG ports.

TACACS

Administrative Accounts

Discusses administrative accounts, access profiles, and creating admin accounts.

User Accounts

Explains user accounts for network access, including configuring user and user groups.

Power over Ethernet

Enabling PoE on a Port

Provides CLI commands to enable Power over Ethernet (PoE) on a specific port.

Determining PoE Power Capacity

Shows the command to check the PoE power capacity of the switch.

Reset PoE Power on a Port

Details the command to reset PoE power on a particular port.