Fortinet FortiSwitch-28C - Configuring Static Routing for the Internal Management Port

System Settings Page 10 Managing a FortiSwitch unit with a FortiGate
Figure 4: Out of band management on a FortiSwitch-1024D
Syntax
config system interface
edit mgmt
set ip 10.105.142.19 255.255.255.0
set allowaccess ping https http ssh snmp telnet
set type physical
next
edit internal
set type physical
end
end
Configuring Static Routing for the Internal Management Port
Using the CLI:
config router static
edit 1
set device <internal>
set default gateway
set gateway 192.168.0.10
end
end
Port 1 used as an
Ethernet data port
Dedicated
MGMT port