Fortinet FortiSwitch-28C - Page 9

System Settings Page 9 Managing a FortiSwitch unit with a FortiGate
Example 3: WAN interface as an inbound management port
In this example, the WAN interface is used as an inbound management port.
Figure 3: WAN interface of a FortiSwitch-28C
Syntax
config system interface
edit wan2
set ip 10.105.142.10 255.255.255.0
set allowaccess ping https ssh
set type physical
next
edit wan1
set mode dhcp
set allowaccess ping https ssh
set type physical
set defaultgw enable
next
edit internal
set type physical
end
end
Example 4: Out of band management interface
In the example, an out of band management interface is used as the dedicated management
port.
WAN 2 port used as an
inbound management port