Fortinet FortiSwitch-28C - Page 8

System Settings Page 8 Managing a FortiSwitch unit with a FortiGate
config switch interface
edit port48
set native-vlan 4090
set stp-state disabled
next
edit uplink1
next
edit uplink2
next
edit internal
set native-vlan 4095
set allowed-vlans 4090
set stp-state disabled
end
end
Example 2: Internal interface as an inbound management interface
In this example, the internal interface is used as an inbound management interface. Also, the
FortiSwitch has a default VLAN across all physical ports and its internal port.
Figure 2: Using the internaI interface of a FortiSwitch-108D-POE
Syntax
config system interface
edit internal
set ip 192.168.1.99 255.255.255.0
set allowaccess ping https http ssh
set type physical
end
end
Port 1 (part of the internal interface)
used as an inband management interface