System Settings Page 7 Managing a FortiSwitch unit with a FortiGate
Example 1: Port 48 as an inbound management interface
In this example, a physical port is used as an inbound management interface. Also, the
FortiSwitch in the example has no default VLAN configured to connect its internal interface to
any physical port.
Figure 1: Using Port 48 of a FortiSwitch-448B unit
Syntax
config system interface
edit internal
set type physical
next
edit mgmt-vlan
set ip 10.105.142.22 255.255.255.0
set allowaccess ping https ssh
set interface "internal"
set vlanid 4090
next
end
Port 48 used as an
inbound management interface
To Next Page
Loading...
