Fortinet FortiSwitch-548B v. 5.2.0.2 - Page 34

- 34 -
7.1.3 show process cpu
This command provides the percentage utilization of the CPU by different tasks.
Syntax
show process cpu
i
It is not necessarily the traffic to the CPU, but different tasks that keep the CPU busy.
Default Setting
None
Command Mode
Privileged Exec
Display Message
The following shows example CLI display output for the command.
Memory Utilization Report
status bytes
------ ----------
free 192980480
alloc 53409968
Task Utilization Report
Task Utilization
----------------------- -----------
bcmL2X.0 0.75%
bcmCNTR.0 0.20%
bcmLINK.0 0.35%
DHCP snoop 0.10%
Dynamic ARP Inspection 0.10%
dot1s_timer_task 0.10%
dhcpsPingTask 0.20%