Fortinet FortiSwitch-548B v. 5.2.0.2 - Page 412

- 412 -
7.25.2.6 ip domain-lookup
This command enables the IP Domain Naming System (DNS)-based host name-to-address translation.
Syntax
ip domain-lookup
no ip domain-lookup
<no> - This command disables the IP Domain Naming System (DNS)-based host name-to-address
translation.
Default Setting
None
Command Mode
Global Config
7.25.2.7 clear domain-list
This command clears all entries in the domain name list table.
Syntax
clear domain-list
Default Setting
None
Command Mode
Privileged Exec
7.25.2.8 clear dns
This command sets the DNS configuration to default value.
Syntax
clear dns