Fortinet FortiSwitch-548B v. 5.2.0.2 - 8.8 Virtual Router Redundancy Protocol (VRRP) Commands

- 484 -
8.7.2 vlan routing
This command creates routing on a VLAN.
Syntax
vlan routing <vlanid> [<vlan-index>]
no vlan routing <vlanid>
<vlanid> - The range is 1 to 3965.
<vlan-index> - VLAN routing index, the range is 1 to 128.
no - Delete routing on a VLAN.
Default Setting
None
Command Mode
VLAN Database
8.8 Virtual Router Redundancy Protocol (VRRP) Commands
8.8.1 Show Commands
8.8.1.1 show ip vrrp
This command displays whether VRRP functionality is enabled or disabled. It also displays some global
parameters which are required for monitoring.
Syntax
show ip vrrp
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Admin Mode: Displays the administrative mode for VRRP functionality on the switch.
Router Checksum Errors: Represents the total number of VRRP packets received with an invalid
VRRP checksum value.