- 500 -
If detail is specified, the following fields are displayed:
Multicast IP Address: This displays the IP Address of the registered multicast group on this
interface.
Last Reporter: This displays the IP Address of the source of the last membership report received for
the specified multicast group address on this interface.
Up Time: This displays the time elapsed since the entry was created for the specified multicast
group address on this interface.
Expiry Time: This displays the amount of time remaining to remove this entry before it is aged out.
Version1 Host Timer: This displays the time remaining until the local router will assume that there
are no longer any IGMP version 1 multicast members on the IP subnet attached to this interface.
This could be an integer value or “-----” if there is no Version 1 host present.
Version2 Host Timer: TThis displays the time remaining until the local router will assume that there
are no longer any IGMP version 2 multicast members on the IP subnet attached to this interface.This
could be an integer value or “-----” if there is no Version 2 host present.
Group Compatibilty Mode: The group compatibility mode (v1, v2 or v3) for this group on the
specified interface.
9.2.1.3 show ip igmp interface
This command displays the IGMP information for the interface.
<slot/port> - Valid slot and port number separated by forward slashes.
Default Setting
None
Command Mode
Privileged Exec
User EXEC
Display Message
Slot/Port: Valid slot and port number separated by forward slashes.
IGMP Admin Mode: This field displays the administrative status of IGMP. This is a configured
value.
Interface Mode: This field indicates whether IGMP is enabled or disabled on the interface. This is a
configured value.
IGMP Version: This field indicates the version of IGMP running on the interface. This value can be
configured to create a router capable of running either IGMP version 1 or 2.
Query Interval (secs): This field indicates the frequency at which IGMP Host-Query packets are
transmitted on this interface. This is a configured value.
Query Max Response Time (1/10 of a second): This field indicates the maximum query response
time advertised in IGMPv2 queries on this interface. This is a configured value.
To Next Page
Loading...
