Fortinet FortiSwitch-548B v. 5.2.0.2 - Page 512

- 512 -
9.3.2.5 ipv6 mld router
Use this command, in the administrative mode of the router, to enable MLD in the router.
Syntax
ipv6 mld router
no ipv6 mld router
Default Setting
Disabled
Command Mode
Global Config
Interface Config
9.3.2.6 clear ipv6 mld counters
The user can go to the CLI Privilege Configuration Mode to clear MLD counters on the system, use the
clear ipv6 mld counters [<slot/port>] priviledge configuration command.
Syntax
clear ipv6 mld counters [<slot/port>]
Default Setting
None
Command Mode
Privilege Exec
9.3.2.7 clear ipv6 mld traffic
The user can go to the CLI Privilege Configuration Mode to clear MLD traffec on the system, use the
clear ipv6 mld traffic priviledge configuration command.
Syntax
clear ipv6 mld traffic