Fortinet FortiSwitch-548B v. 5.2.0.2 - Page 521

- 521 -
<slot/port> - Interface number.
all - this command represents all interfaces.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Interface: Valid slot and port number separated by forward slashes.
IP Address: This field indicates the IP Address that represents the PIM-DM interface.
Nbr Count: This field displays the neighbor count for the PIM-DM interface.
Hello Interval: This field indicates the time interval between two hello messages sent from the router
on the given interface.
Designated Router: This indicates the IP Address of the Designated Router for this interface.
9.5.1.4 show ip pimdm neighbor
This command displays the neighbor information for PIM-DM on the specified interface.
Syntax
show ip pimdm neighbor [<slot/port> | all]
<slot/port> - Interface number.
all - this command represents all interfaces.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Neighbor Addr: This field displays the IP Address of the neighbor on an interface.
Interface: Valid slot and port number separated by forward slashes.
Up Time: This field indicates the time since this neighbor has become active on this interface.
Expiry Time: This field indicates the expiry time of the neighbor on this interface.