1110
Rack Installation
Caution: To avoid personal injury or damage to the device, we recommend
that two people mount the rack tray on a rack
1
2
4
5
3
Level and line up the rack mount tray ear holes with the rack holes.
Finger tighten four rack screws from the rack tray to the rack.
Tighten the rack screws using a screwdriver.
Connect the power and network connections, then secure the power
adapter device using the provided cable ties.
Verify that the device is level and there is 1.5 inches of space above
and below the device for adequate air flow.
To Next Page
Loading...