Defrosting
• Too much frost will diminish the cooling effect.
• The freezing unit should be defrosted whenever frost builds up to 7mm.
Defrosting Steps
1. Clear up the refrigerator and set the temperature control knob to OFF; then unplug the refrigerator.
2. Open the door of the refrigerator and wait until the frost melts naturally. Never use any mechanical tool or
other tools to accelerate the defrosting process.
3. After the frost melts, pou
r water out of the drip tray.
4. After defrosting is finished, plug the refrigerator again and set the temperature control knob to the original
position; put objects back into the refrigerator again after it operates for 2~3 hours.
MAINTENANCE INSTRUCTION
Doors
• Clean the doors with dry cloth frequently. Never clean it with water directly.
• Never clean the refrigerator with toluene, brush or chemical cloth to prevent damage to the baking finish
a
nd internal parts.
Inside of the freezer chamber and refrigerating chamber as well as accessories
• Clean up inside of the freezer and the refrigerating chamber as well as accessories once a month. Before
cleaning, take all objects out of the refrigerator and unplug it; any removable accessory should be taken out
for cleaning.
Refrigerator Wall
• Beware of the backside of the refrigerator to prevent any cockroach or rat from making nests there.
• The smooth
back design hides the cooling tubes in walls of the refrigerator; so please keep the walls clean
in order to maintain a food cooling condition.
Emergency Treatment
Stop operation of the refrigerator and unplug it if any abnormal situation occurs (e.g. smell of burning).
• If the refrigerator continues its operation under abnormal conditions, fire and electric shock may happen
due to heat radiation.
• Please consult the autho
rized service center.
6
Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer,
its service agent or similar qualified person.
Changing the Light
•
To Next Page
Loading...
Need help?
General
