Fortress Technologies FDH1214 - Drainage Instruction; Continuous Drainage Setup; Connecting for Continuous Flow

4
DRAINAGE INSTRUCTION
While the tank is full, the compressor and the fan will stop operating, and the tank full indicator will be
on. Please empty the tank.
*Please turn off and unplug the appliance before removing the tank.
1. Remove the tank carefully.
2. Empty the tank.
3. Insert the tank gently back into the appliance.
CONTINUOUS DRAINAGE
1. Turn off and unplug the appliance, then pull out the tank.
2. Take off the hose stopper in the tank and plug it in the water outlet. (Fig. 1)
3. Use a knife or forceps to remove the drain hole. (Fig. 2)
4. Connect the drain hole with an 12mm inner diameter water tube. (Fig. 3)
* Please purchase the water tube.
5. Put the tank back to its position.
Fig. 1
Fig. 2
Fig. 3
Hose stopper
Drain hole
Water tube