Fortress Technologies FDH3816 User Manual

4
Continuous dehumidify:
Room humidity ≥ 60%: the compressor will be on and operated with high fan speed.
Room humidity ≤ 55%: the compressor will be on and operated with medium fan speed.
60% > Room humidity >55%: continuous operating with existing mode.
Laundry drying: the appliance operates with high fan speed and dehumidifies continuously.
Air purifying: the appliance operates with high fan speed without dehumidifying. Press the
humidity setting/fan speed button to select high or medium fan speed.
*Please install the carbon filter before selecting the air purifying mode. Dehumidifier will stop
operating if the carbon filter is not installed under the air purifying mode. Once the carbon filter is
installed, the carbon filter indicator “ ” will be on; if the carbon filter is not properly installed,
the indicator “ ”will start flashing on the LCD display to remind you to install the carbon filter.
Ventilation: the appliance operates with high fan speed without dehumidifying. Press the humidity
setting/fan speed button to select high or medium fan speed. It can help the air circulation.
*Please make sure to take off the carbon filter before selecting this mode. If the carbon filter is not
uninstalled, the carbon filter indicator “ ” will start flashing on the LCD display to remind you
to take it off.
5. Key lock
Press the mode button for 3 seconds to lock all the buttons. The key lock indicator will be on. Press
the mode button for 3 seconds again to deactivate the key lock.
6. Sleep mode button
Press the sleep mode button to activate the sleep mode under the auto dehumidify/continuous
dehumidify/laundry drying/ventilation mode. The sleep mode indicator will be on and operate with
low fan speed.
*Sleep mode cannot be activated under the internal drying mode.
7. Wind direction button
Press the wind direction button to set the direction of the air deflector, and activate the movement
of the air deflector. Fan speed & wind direction indicator will be flashed in cycle. Press again to
deactivate it.
8. Ionizer button
Press the ionizer button to activate the ionizer function, and the ionizer indicator will be on. Press
again to deactivate it.
*Ionizer function cannot be activated under the internal drying mode.

Fortress Technologies FDH3816 Specifications

General

Brand	Fortress Technologies
Model	FDH3816
Category	Dehumidifier
Language	English