Fortress Technologies FDH3816 User Manual

6
CONTINUOUS DRAINAGE
1. Turn off and unplug the appliance.
2. Use a knife or forceps to remove the cover of the continuous drain hole cover. (Fig. 3)
3. Remove the water tank and push the drain hole gasket. (Fig. 4)
4. Connect the continuous drain hole with an 9mm inner diameter water tube. Please make sure the
connection is well completed in order to avoid water leakage (insert into the drain hole around
10mm). (Fig. 5)
* Please purchase the water tube.
5. Insert the water tank back into the appliance. (Fig. 6)
Note
 The water tube may be frozen in cold weather, which will affect the drainage.
 Please make sure to install the water tube properly and avoid bending. If the drainage is not
smooth, it may cause water leakage and wet the floors or furnitures.
 The dehumidifying function will stop immediately after shutdown, but there will be a small
amount of water discharged from the drain hole. When the appliance is not in use for a
prolonged period, please place it for one day before package and storage.
 Do not use the appliance continuously for a long time in order to avoid overheat and cause
mechanical damage or hazard.
Fig.3
Fig.4
Continuous
drain hole
Water tube
Fig.5
Fig.6
Before push
before
After push

Fortress Technologies FDH3816 Specifications

General

Brand	Fortress Technologies
Model	FDH3816
Category	Dehumidifier
Language	English