EN
21
step that is being carried out.
Prewash
When “Prewash” auxiliary function is
selected, prewash symbol will light up to
indicate the beginning of prewash step.
Main wash
Main wash symbol lights up to
indicate that the main wash cycle has
started.
Rinse
Rinse symbol lights up at the beginning
of the rinse step.
Softener
Softener symbol lights up at the
beginning of softener step.
Spin
Spin symbol lights up at the beginning
of the final spin, during “Spin” and
“Pump” special programs.
If the machine is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated because
of the excessive unbalanced
distribution of the laundry in the
machine.
Changing the selections after
the program has started
The selected spin speed and program
temperature fade out. An empty frame
appears.
When the “Program selection” button is
brought to the appropriate position, rpm
and temperature data reappear.
Switching the machine to standby
mode
You may switch the machine to
standby
mode
by pressing “Start/Pause/Cancel”
mode
lights up and the start symbol
(Figure 3-
13j)
that shows the program has
started
and still continuing fades out.
Selecting or canceling an auxiliary
function in standby mode
Auxiliary functions can be cancelled or
selected in accordance with the step the
program is at.
Adding/taking out laundry in standby
mode
The door can be opened if the water
level is
suitable. The door locked symbol
(Figure 3-13i) will light up until the door
is suitable
fo
r opening. This symbol will
fade out as soon as the door is allowed
to open. Laundry may be added / taken
out by opening the door.
Door lock
Doo
If the door cannot be open for any safety
reasons, the standby mode symbol will
flash. Likewise,if the door is allowed to
open;the standby mode symbol lights up.
r Locked Symbol (Figure 3-13i) lights
up when the loading door is locked. This
symbol will flash until the door is allowed
to open. Do not force the door at this
stage. This symbol will fade out as soon
as the door is allowed to open. You may
open the door after the symbol fades
out.
Child lock
You can protect the appliance from
being played by children by means
of the child lock. In this case, no
change can be made in the running
program.
The machine is switched on child-lock
by pressing the 2nd and 4th auxiliary
functions for 3 sec. “C on” (Child lock is
activated) label appears on the screen.
The same symbol will also be displayed
(Figure 2-10) for a short time.
button
Standby
symbol (Figure 3-13k) which
indicates
that the machine is in standby
To Next Page
Loading...
Need help?
General
