Maintenance
43
6.3 Cleaning Procedures
Removing dry dirt
Upholstery, metal parts and frame parts can usually be cleaned easily with a
dry soft cloth.
Removing mud and/or other wet dirt
Parts that are soiled with wet dirt can best be cleaned by first wiping the dirty
parts with a damp cloth and then wiping them dry with a dry soft cloth.
Upholstery
Clean with a damp cloth. After removing the dirt, the cleaned parts should be
wiped dry with a soft dry cloth.
• Never use abrasive or aggressive cleansers. They can damage
the scooter.
• Also do not use organic solvents such as thinner, dry-cleaning
naphtha, or white spirit.
• Do not spray or pour water on scooter.
• Be careful with water near the electronic system.
• Upholstery: do not dry clean, iron or spin dry.
EBAXXX-010704000-en.doc
To Next Page
Loading...
Need help?
General
