2. GREEN intensity: Green LEDs dimming from minimum to maximum.
3. BLUE intensity: Blue LEDS dimming from minimum to maximum.
4. Master dimmer: intensity adjustment for the RGB LEDs from minimum to maximum.
5. Flash Duration: 0 – 255 (0 – 650 ms@50 Hz AC, or 0 – 530 ms@60 Hz AC)
6. Flash Rate:
• 0 – 5 No flash (single flash with ch.1)
• 6 – 255 Flash (0,5 – 25 Hz@50 Hz, or 0,6 – 30 Hz@60 Hz)
7. Special Effects:
• 0 – 5 No effect
• 6 – 50 Fade in effect.
• 51 – 100 Fade out effect.
• 101 – 150 Fade in / out effect.
• 151 – 200 Lighting effect.
• 201 – 255 Random flash.
General Information
Replacing a fuse:
Always disconnect the fixture from main power before replacing a fuse. Use only the appropriate fuse,
with the same type and rating. A fuse with different rating, can damage the fixture in case of failure.
Risk of electric shock and / or fire:
The fixture must be earthed, supplied always with its nominal voltage and cleaned periodically from dust.
For cleaning use only, a moist cloth. Never use liquids or force water. After cleaning, let the fixture dry
before use.
Intensity
Flash intensity can be set from minimum (blackout), to maximum on 1 channel DMX modes, channel 2, in
2 channel DMX mode and channel 1 in the 3 and 4 channel DMX modes.
Duration
To Next Page
Loading...