Foscam FI9828P Quick Installation Guide

ShenZhen Foscam Intelligent Technology Co., Ltd
www.foscam.com
V4.6
EQ982809
Package Contents
Quick Installation Guide
Resource CD
Ethernet Cable
Power Adapter
IP Camera
1 Hardware Introduction
2 Software Installation
3 Access the IP Camera
1. Enable the DHCP feature of your router (Enabled by default
normally), then open the Equipment Search Tool program. It
should display the camera’s IP address in your LAN (Local Area
Network).
Note：
Doesn't support 64-bit browser.
3. After installing the add-on, refresh the browser and click
Login .
Main stream oers the highest
quality video while Sub stream
oers less quality, but also less
delay when viewing.
Default username is admin with
no password.
5. After log in, you will see live video on the interface.
Notes:
After log in for the rst time, it will go to "Setup Wizard”
automatically. Please set the basic parameters, such as the
camera name, camera time, wireless settings and more.
If you forget your username or password, you can press and
hold the reset button on the cable of the camera using a pin for
5 seconds. This resets the camera to factory defaults.
If the IPC automatic focusing failed(image blur), you need to
click the Focus to manually adjusting focus.
Click Install
4. When you log in for the rst time, it will request that you
modify the default username and/or password. Input the New
username, New password, and Confirm the password, click
Modify to complete the modication. You will now use the new
username and password to login to the camera in the future.
2. Double click the camera listed here, and your default browser
will open up to the camera’s login page. When log in for the rst
time, you will need to download and install the add-on. We will
use Internet Explorer as an example. For Google Chrome, Apple
Safari, or Mozilla Firefox, please refer to the User Manual.
Notes:
If your computer ( Windows OS ) supports autorun function,
you can nd the corresponding le in the opened control panel.
I f your computer doesn’t have CD drive, you can download
the Equipment Search Tool from our website for free.
Wi-Fi Antenna
Quick Installation Guide
Model:FI9828P
HD Wireless PTZ Dome IP Camera with P2P
Quick Installation Guide
Model:FI9828P
HD Wireless PTZ Dome IP Camera
Infrared LED
LENS
Antenna
LAN
Audio in/out
Power
Alarm in/out
Reset Button
WPS
1. Mount the antenna and make it stand vertically.
2. Connect the camera to the LAN network (Router or Switch)
via network cable.
3. Connect the power adapter to the camera.
Warranty Card
Hardware Connection
Physical Description
1. Insert the CD into the CD drive of your computer.
2. Go to the folder “Equipment Search Tool” and nd the folder
“For Windows OS”or “For Mac OS”. Copy and paste the
Equipment Search Tool le to your computer, or drag it onto
your desktop.
Security Warning
Foscam cameras and NVRs require good security practices
to safeguard your privacy. You should regularly change
your camera or NVR password which is 8-10 numbers,
letters, symbols combination.
You should update your camera or NVR regularly. Make
sure your camera or NVR has the latest rmware installed
for your specic model and better experience.
CE Certicate Website:
http://www.foscam.com/company/ce-certicate.html
32
654
1

Foscam FI9828P Specifications

General

Type	IP security camera
Megapixel	1.3 MP
PTZ control	Yes
Certification	CE, FCC
Photo feature	-
Maximum frame rate	30 fps
Placement supported	Outdoor
Connectivity technology	Wireless
Video formats supported	H.264
Maximum video resolution	1280 x 960 pixels
Interface	Firewire (IEEE 1394)
Form factor	Dome
Mounting type	Clip
Product color	White
Built-in microphone	No
International Protection (IP) code	IP66
Supported video modes	240p, 360p, 480p, 720p
Image quality adjustment	Brightness, Contrast, Saturation
Supported graphics resolutions	320 x 180, 320 x 240, 640 x 360, 640 x 480 (VGA), 1280 x 720 (HD 720), 1280 x 960
Optical zoom	3 x
Focal length range	2.8 - 12 mm
Maximum aperture number	1.6
Audio system	2-way
Voice codecs	G.726
Audio formats supported	G.726, PCM
Audio input	1
Sustainability certificates	RoHS
Security algorithms	HTTPS, WEP, WPA, WPA2
Alert notification type	E-mail
Password protection type	User
Cables included	LAN (RJ-45)
Sensor type	CMOS
Optical sensor size	1/3 \
Pan range	0 - 355 °
Tilt angle range	0 - 78 °
Minimum illumination	0 lx
LED type	IR
Night vision distance	20 m
Number of illumination LEDs	21
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Wi-Fi data rate (max)	150 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	IP、TCP、UDP、HTTP、HTTPS、SMTP、FTP、DHCP、DDNS、 UPnP、RTSP
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
DC output current	2 A
DC output voltage	12
Power consumption (max)	10 W
Browser supported	IE8 and above version;Firefox, Chrome, Safari
Mobile operating systems supported	Android, iOS
Operating temperature (T-T)	-20 - 60 °C
Storage relative humidity (H-H)	0 - 90 %
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	240 mm
Width	140 mm
Height	160 mm
Weight	1800 g