Do you have a question about the Foscam FI9828P and is the answer not in the manual?
Type | IP security camera |
---|---|
Megapixel | 1.3 MP |
PTZ control | Yes |
Certification | CE, FCC |
Photo feature | - |
Maximum frame rate | 30 fps |
Placement supported | Outdoor |
Connectivity technology | Wireless |
Video formats supported | H.264 |
Maximum video resolution | 1280 x 960 pixels |
Interface | Firewire (IEEE 1394) |
Form factor | Dome |
Mounting type | Clip |
Product color | White |
Built-in microphone | No |
International Protection (IP) code | IP66 |
Supported video modes | 240p, 360p, 480p, 720p |
Image quality adjustment | Brightness, Contrast, Saturation |
Supported graphics resolutions | 320 x 180, 320 x 240, 640 x 360, 640 x 480 (VGA), 1280 x 720 (HD 720), 1280 x 960 |
Optical zoom | 3 x |
Focal length range | 2.8 - 12 mm |
Maximum aperture number | 1.6 |
Audio system | 2-way |
Voice codecs | G.726 |
Audio formats supported | G.726, PCM |
Audio input | 1 |
Sustainability certificates | RoHS |
Security algorithms | HTTPS, WEP, WPA, WPA2 |
Alert notification type | |
Password protection type | User |
Cables included | LAN (RJ-45) |
Sensor type | CMOS |
Optical sensor size | 1/3 \ |
Pan range | 0 - 355 ° |
Tilt angle range | 0 - 78 ° |
Minimum illumination | 0 lx |
LED type | IR |
Night vision distance | 20 m |
Number of illumination LEDs | 21 |
Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
Wi-Fi data rate (max) | 150 Mbit/s |
Ethernet interface type | Fast Ethernet |
Supported network protocols | IP、TCP、UDP、HTTP、HTTPS、SMTP、FTP、DHCP、DDNS、 UPnP、RTSP |
Compatible memory cards | MicroSD (TransFlash) |
Maximum memory card size | 32 GB |
DC output current | 2 A |
DC output voltage | 12 |
Power consumption (max) | 10 W |
Browser supported | IE8 and above version;Firefox, Chrome, Safari |
Mobile operating systems supported | Android, iOS |
Operating temperature (T-T) | -20 - 60 °C |
Storage relative humidity (H-H) | 0 - 90 % |
Operating relative humidity (H-H) | 20 - 85 % |
Depth | 240 mm |
---|---|
Width | 140 mm |
Height | 160 mm |
Weight | 1800 g |
Explains accessing the camera via HTTP/HTTPS within a local network using IP addresses and ports.
Covers accessing the camera remotely via WAN IP, static/dynamic IPs, and DDNS.
Guides on configuring port forwarding and UPnP for router access and internet connectivity.
Details the login process, user authentication, and the initial setup wizard for camera configuration.
Details IP, PPPoE, DDNS, Wireless, UPnP, and Port settings for network connectivity.
Covers motion detection, I/O alarms, and recording settings including storage and schedules.
Covers backup/restore, firmware upgrades, factory reset, and rebooting the camera.