Need help?Do you have a question about the Foscam FI9828W and is the answer not in the manual?
General| Model | FI9828W |
|---|---|
| Category | IP Camera |
| Image Sensor | 1/4" CMOS |
| Resolution | 1280 x 720 |
| Viewing Angle | 70° |
| Night Vision | Yes |
| Wireless | Yes |
| Wireless Standard | IEEE 802.11b/g/n |
| Wireless Security | WEP, WPA, WPA2 |
| Ethernet | 10/100Mbps |
| Video Compression | H.264 |
| Frame Rate | 30fps |
| Audio | Two-way audio |
| Motion Detection | Yes |
| SD Card Slot | Yes |
| Max SD Card Capacity | 32GB |
| Power Supply | DC 5V/2A |
| Infrared Mode | Automatic |
| Operating Humidity | 10% ~ 80% (non-condensing) |
Guide on how to access the camera within a local network using its IP address.
Instructions for accessing the camera remotely over the internet.
Overview of the main interface for live video monitoring and control.
Covers IP configuration, DDNS, wireless settings, UPnP, and port settings.
Configuration options for video stream settings, OSD, and privacy zones.
Settings for motion detection and IO alarm configurations.
Options for setting storage locations, alarm recording, and schedule recording.
To Next Page
