Need help?Do you have a question about the Foscam FI9831P and is the answer not in the manual?
General| Model | FI9831P |
|---|---|
| Category | IP Camera |
| Frame Rate | 30 fps |
| Night Vision | Yes |
| Audio | Two-way audio |
| Wireless Security | WEP, WPA, WPA2 |
| Ethernet | 10/100Mbps |
| Weight | 300g |
| Supported Systems | Windows, Mac, iOS, Android |
| Image Sensor | 1/4" CMOS |
| Resolution | 1280x720 |
| Night Vision Range/IR Distance | 8m |
| Connectivity | Wi-Fi |
| Pan/Tilt Angle | Tilt: 120° |
| Storage | MicroSD card (up to 32GB) |
| Power Supply | DC 5V/2.0A |
| Operating Temperature | -10°C to 50°C |
| Operating Humidity | 10% to 90% |
| Supported Protocols | HTTP, RTSP, TCP/IP, UDP, SMTP, FTP |
Lists the main functionalities and capabilities of the IP camera.
Guides users on connecting to the camera within their local network using IP addresses.
Explains how to access the camera remotely over the internet using WAN IP.
Details the interface for logging into the camera's web management system.
Guides static IP setup, subnet mask, gateway, and DNS server configuration.
Details connecting the camera to a Wi-Fi network by selecting SSID and entering passwords.
Explains setting up Dynamic DNS for remote access using hostnames.
Configures motion detection sensitivity, trigger interval, and actions like email alerts.
Specifies where recorded video files are saved, such as SD card or FTP.
To Next Page
