Foscam FI9831P - Default Parameters; Specifications

www
www
.foscam.
.foscam.
us
us
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
84
7.2 Default Parameters
Default network Parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
DDNS: Embedded FOSCAM domain name
Username and password
Default username is admin with a blank password
7.3 Specifications
ITEMS FI9831P
Image Sensor Image Sensor 1/3"Color CMOS Sensor
Display Resolution 1280*960 Pixels
Lens f: 2.8mm, F:2.4
Mini. Illumination 0Lux
View angle 80 degrees
Video Image Compression H.264
Resolution 960p（1280*960），VGA（640*480）
View H.264 dual streaming
Image adjust The brightness, contrast, saturation , is adjustable
Infrared mode Automatic , manual (on/off)
Light Frequency 50Hz, 60Hz
Night visibility Φ5mm 11 IR LEDs, Night visibility up to 8 meters
Pan/Tilt Angle Horizontal:300° & Vertical: 120°
Network
Ethernet One 10/100Mbps RJ-45
Supported Protocol
TCP/IP、UDP/IP、HTTP、SMTP、FTP、DHCP、DDNS、UPNP、
ONVIF
Wireless Standard WIFI(IEEE802.11b/g/n)
Support IP address static IP address, dynamic IP address
WPS Supports WPS one button push wireless connection
Remote Access P2P, DDNS
Power Power Supply DC 5V/2.0A (EU,US,AU adapter or other types optional)
Power Consumption 8Watts (Max.)
Alarm Alarm detection The motion detecting, detection threshold Settings
Alarm inform Support Email、FTP etc alarm inform way
Hardware
Interface
SD CARD SD CARD (Support to 32G)
Audio Input/Output One audio input jack, One audio output jack.
Reset Buttons One Reset
Ethernet One 10/100Mbps RJ-45