How to fix high temperature in my Foster EcoPro G3 EP700L2 Freezer?
If the internal temperature of your Foster Freezer is too high, make sure the door is closed properly. Also, ensure that the airflow inside isn't blocked by too much product or poor loading practices. The alarm should reset once the temperature returns to normal.
Why is my Foster EcoPro G3 EP700L2 Freezer too cold?
If the internal temperature of your Foster Freezer is too low, verify that you haven't loaded it with products that were already colder than the freezer's normal operating temperature.
Why is my Foster EcoPro G3 EP700L2 not cooling enough?
If your Foster Freezer isn't cooling properly, first, ensure the temperature is displayed and that the appliance isn't in standby mode ('oFF' on the display). Secondly, inspect and clean the condenser. Also consider whether a heat source is affecting the freezer's performance and move the appliance if necessary. Finally, check that the product loading follows the guidelines.
What to do if my Foster EcoPro G3 EP700L2 Freezer is not working?
If your Foster Freezer isn't working, begin by checking if it's properly plugged in and that the socket is 'live' by testing it with another appliance. Also, inspect the fuse and replace it if needed.
How to turn off door alarm on Foster Freezer?
To stop the alarm, ensure that the door of your Foster Freezer is properly closed.
What to do after power outage with Foster Freezer?
If power to your Foster Freezer has been restored after an outage, carefully check the stored products to ensure they're still safe to use. The appliance will resume normal operation, and you can cancel the 'PF' message by pressing button 3 once.
What does the error message on my Foster EcoPro G3 EP700L2 mean?
The display on your Foster Freezer might show indicators that are described in the ‘Alarms and Warnings’ section. For any other issues, it is recommended to contact your authorised dealer or Foster Service.
What to do when the condenser clean period has expired on my Foster EcoPro G3 EP700L2?
Please contact your authorised dealer or Foster Service regarding the condenser clean period expiry on your Foster Freezer.
What to do if the internal temperature probe has failed on my Foster EcoPro G3 EP700L2?
Call your authorised dealer or Foster Service to arrange for replacement of the internal temperature probe of your Foster Freezer.
What to do if the evaporator probe has failed on my Foster EcoPro G3 EP700L2 Freezer?
Call your authorised dealer of Foster Service to arrange for replacement of the evaporator probe of your Foster Freezer.
Essential safety precautions for operating and handling the appliance.
Overview of the control panel's display icons and button functions.
Guide to viewing and changing the appliance's set point temperature.
General procedures and safety advice for appliance cleaning.
Explanation of appliance alarms, warnings, and fault codes.
Essential checks to perform before contacting service or supplier.
General| Category | Freezer |
|---|---|
| Brand | Foster |
| Temperature Range | -18°C to -21°C |
| Dimensions (H x W x D) | 1995mm x 700mm x 865mm |
| Exterior Finish | Stainless Steel |
| Interior Finish | Aluminium |
| Shelves | 3 |
| Refrigerant | R290 |
| Energy Efficiency Class | C |
| Defrost System | Automatic |
| Model | EP700L2 |
| Capacity | 600 Litres |
| Total Net Capacity | 600 Litres |
To Next Page
