To Next PageTo Next Page
Need help?Do you have a question about the Foster F20 and is the answer not in the manual?
Provides a general overview of the electronic ice makers and their quality.
Details the process of visually inspecting the packaging and unit for any damage.
Outlines criteria for selecting the installation location and ensuring the unit is level.
Explains how to correctly connect the water supply and drain lines for the ice maker.
A list of checks to perform after installation to ensure proper setup and function.
Illustrates the recommended physical setup and connections for the ice maker.
Presents key specifications and performance data for the F20 and F40 models.
Guides the user through the initial power-on and freezing cycle sequence.
Describes how to adjust cube size and bin level thermostat settings.
Presents key specifications and performance data for the F60 and F85 models.
Guides the user through the initial power-on and freezing cycle sequence.
Describes how to adjust cube size and bin level thermostat settings.
Provides a detailed procedure for cleaning the ice maker's water system.
Lists technical specifications for R22 machines, including output and consumption.
Details the procedure for powering on and initiating the ice maker's operation.
Describes checks to perform during the ice making cycle for proper functioning.
Explains the fundamental process of water circulation and ice formation in the machine.
Details the stages of the ice making process, from water spraying to mold refrigeration.
Explains the process of releasing the ice cubes from the molds and preparing for the next cycle.
Describes the sequence of operations controlled by the electronic board during cycles.
Explains the function and settings of the DIP switches for programming the unit.
Details the DIP switch settings for FCI 20 and FCI 30 R134A models and their effects.
Guides the initial start-up procedure for FCI 40-60-85 models.
Describes checks to perform during operation for FCI 40-60-85 models.
Explains the fundamental process of water circulation and ice formation in the machine.
Details the stages of the ice making process, from water spraying to mold refrigeration.
Explains the process of releasing the ice cubes from the molds and preparing for the next cycle.
Describes the sequence of operations controlled by the electronic board during cycles.
Describes the sensor that detects evaporator temperature and signals the PC board.
Details the sensor that monitors condenser temperature variations.
Explains the sensor that detects ambient or water temperature to adjust defrost cycle.
Describes the sensor that stops operation when the ice bin is full.
Explains the function of the main control board and its integrated components.
Provides general guidelines and considerations for ice maker maintenance and cleaning.
Outlines the recommended maintenance schedule for the ice maker components.
Details the procedure for cleaning the water system, evaporator, and bin.
General
