To Next PageTo Next Page
Need help?Do you have a question about the Foster F200 and is the answer not in the manual?
Technical specifications of the ice cuber models including output and dimensions.
General notes and guidelines for installing the ice cuber unit.
Procedure for safely stacking multiple ice cuber units.
Introduction and overview of machine specifications for installation.
Critical safety warnings and precautions for installation personnel.
Step-by-step guide for the physical installation of the unit.
Describes the initial power-on sequence and component operation.
Details the process of ice formation within the unit.
Refrigeration, water systems, and ice harvest process explanation.
The logic governing the machine's operational cycles.
Specific condition for water level errors and reset mode.
Alarm for elevated condenser temperature and reset mode.
Procedures for water pump, reservoir, distributor, and valves.
Procedures for servicing compressor, condenser, and drier.
Procedure to remove and replace the hot gas valve.
Description of front console, PC board, and key sensors.
Description of contactor, ice thickness, and magnetic switch.
Description of high pressure controls and hot gas valve.
Description of condenser fan motor and water regulating valve.
Description of water distribution, drain, and inlet valves.
Description of thermostatic expansion valve and water level sensor.
Performance data for new, clean machines.
Parameters for freeze and harvest cycles, and refrigerant charge.
Description of the main operational switch and electronic control board.
Maintenance for icemaker and cleaning for ice storage bin.
Cleaning external surfaces and detailed icemaker cleaning process.
How the refrigeration system operates during ice harvest.
Water flow and operational logic during harvest cycle.
Explanation of the refrigeration system during the freeze cycle.
Key requirements and site selection for installation.
Mounting the ice maker and final installation checks.
Plumbing code compliance and water supply connection details.
Instructions for drain plumbing connections.
Steps for initial power-on and setup.
General
