37
4/ ACTIONS BEFORE FIRST USE
EN
Possible to use
traditional products
➊
Use of traditional products
only
➊
First of all, in one simple action, you can test the lime content in your water using the testing strip
supplied with your dishwasher or you can contact your local water utility to find out how hard your
water is.
— Turn on the tap and let the water run for a few minutes.
— Fill a glass with water.
— Take the testing strip out of its casing and immerse it for 3 seconds.
— Wait 1 minute, shake the strip and look at the colours to find out how hard your water is.
• MEASURE THE WATER HARDNESS AND SELECT THE TYPE OF DETER-
GENT: TRADITIONAL OR MULTI-PURPOSE
TTeessttiinngg ssttrriipp
HHaarrddnneessss
0-10°F 10-25°F 25-40°F 40-55°F 55-70°F > 70°F
WWaatteerr
Soft Slightly hard Slightly hard Hard Hard Very hard
SSoofftteenniinngg aanndd
uussee ooff ssaalltt
Optional
Essential if
using traditio-
nal products
Essential if
using traditio-
nal products
Essential Essential Essential
• HARDNESS TABLE
To Next Page
Loading...