How to y...controls
1. To increase tether length push the length control
button forward. This will cause the Fotokite to y
away in the direction it is headed
3. To bring the Fotokite back down, pull the tether
length control button back.
Upon pulling the length control button back, the
Leash will communicate with the Fotokite and send a
signal to reduce thrust, this will cause it to
reduce altitude, however to increase speed you can
pull the Fotokite towards you.
2. When you want the Fotokite to stop, let go of
the length control button, and it will stop the
tether release.
8. To stop, grab the Flight Frame and
press the power button.
Long press turns o.
4. Twist the Flight Frame 90° and back to
the right.
To Next Page
Loading...