9
Stroller Operation & Use (continued)
Parking Brake Operation:
To lock parking brake:
1. Press down on parking brake lock bar
on the rear wheel assembly (Fig. 1).
2. Check that wheels are locked.
To unlock parking brake:
1. Lift parking brake lock bar up (Fig. 2).
Runaway Brake Operation:
To release runaway brake:
1. Pull runaway brake bar back and hold
runaway brake bar against stroller handle
while pushing stroller (Fig. 3).
To apply runaway brake:
1. Release runaway brake bar (Fig. 4).
Fig. 1
Fig. 2
Fig. 4
Fig. 3
10
Stroller Operation & Use (continued)
Front Wheel Swivel Lock Operation:
To lock front wheel swivel:
1. Rotate front wheel assembly until it is
straight back and swivel lock is aligned
with swivel lock track (Fig. 1).
2. Push swivel lock up over swivel lock track
until it snaps into place.
3. Check that front swivel is securely locked
by pushing side to side on front wheel
assembly.
4. Repeat steps 1 through 3 for each of the
other two (2) front wheel assemblies.
To unlock front wheel swivel:
1. Push swivel lock down until it is free of the
swivel lock track (Fig. 2).
2. Repeat step 1 for each of the other two (2)
front wheel assemblies.
Fig. 1
Fig. 2
Swivel
Lock
Track
Swivel
Lock