6 Master User Setup)
The Communicator must have a valid Master User learnt in memory that allows
access to programming. The Communicator uses this Cell phone Number to validate
setup programming commands. NB: Enable SMS Delivery Reports to see that the commands
deliver to the Communicator.
From the Cell number you wish to use as the Master User, SMS the
Following:
From Master user SMS:
.M1#
To the Cell Number of
the SIM you inserted
into the Communicator.
Master User
added.
RECEIVED
.M1#
SENT
.,!
GHI
ABC
DEF
JKL
MNO
PQRS
TUV
WXYZ
0
#
X
CELL PHONE
SMS
+27721234567
This Command will add the number
of the sender as the andMaster User
will reply with an SMS confirming the
action.
To Next Page
Loading...