20
EN
MALFUNCTIONS
PROBLEM POSSIBLE CAUSE
The drill press does not start
-
The electric current is missing in the socket to which the supp
ly
cabl
e is conn
ected.
-
The supply cable is faulty
-
The engine is damaged
-
The cover of pulleys
’ box is not closed
The tools wear rapidly
-
The tool is not correctly sharpe
ned
-
The tool is not suitable for the material to be cut, or the lubricant
oil is missing during metal
cutting,
-
Too high advance
The engine does not work properly
The engine may be damaged: get the machine checked by an
electrician
The axle goes up and down with
difficulty:
Clean and grease the axle of the spindle under the pulley.
AFTER-SALES SERVICE / GUARANTEE
SERRACON is proud of the quality power tools it s
ells. The component parts of our tools are inspected at
various stages of production and each finished tools is subjected to a final check before being packaged for
shipment. Because of our confidence in our engineering quality. SERRACON agrees to repair or replace any
part or parts of FOX Power Tools and accessories which examination proves to be defective in workmanship or
material. The warranty period for FOX brand is one year. Any alleged defective part or parts must be returned
prepaid to SERRACON or one of the service centres. The guarantee does not include repair labour or parts
replacement required because of misuse, abuse, or normal wear and tear. Repairs made by other than our
factory, SERRACON service centre or authorized service station relieve SERRACON of further liability under
this guarantee. THIS GUARANTEE IS MADE EXPRESSLY IN PLACE OF ALL OTHER GUARANTEES OR
WARRANTIES, EXPRESSED OR IMPLIED, WITH RESPECT TO QUALITY, MERCHANTABILITY, OR
FITNESS FOR A PARTICULAR PURPOSE.
To Next Page
Loading...
Need help?
General
